Important Universal Codes For Mobile Handset / Service Provider

Today we are discussing here some basic and much more important phone codes which will be definitely useful. Everyone should put glance on this.

:: NOKIA ::

Nokia Universal Codes Code Description :
These Nokia codes will work on most Nokia Mobile Phones

1) *3370# Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talktime is reduced my approx. 5%
2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )
3) *#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
4) *#4720# Deactivate Half Rate Codec.
5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )
6) *#9999# Phones software version if *#0000# does not work.
7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). (Favourite)
8)#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
9) #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
10)#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
11)#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
12)*#147# (vodafone) this lets you know who called you last.
13)*#1471# Last call (Only vodofone).
14)*#21# Allows you to check the number that “All Calls” are diverted to
15)*#2640# Displays security code in use.
16)*#30# Lets you see the private number.
17)*#43# Allows you to check the “Call Waiting” status of your phone.
18)*#61# Allows you to check the number that “On No Reply” calls are diverted to.
19)*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls
are diverted to.
20)*#67# Allows you to check the number that “On Busy Calls” are diverted to.
21)*#67705646# Removes operator logo on 3310 & 3330.
22)*#73# Reset phone timers and game scores.
23)*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.
24) *#7760# Manufactures code.
25)*#7780# Restore factory settings.
26)*#8110# Software version for the nokia 8110.
27)*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )
28)*#94870345123456789# Deactivate the PWM-Mem.
29)**21*number# Turn on “All Calls” diverting to the phone number entered.
30)**61*number# Turn on “No Reply” diverting to the phone number entered.
31)**67*number# Turn on “On Busy” diverting to the phone number entered.
32)12345 This is the default security code.
33)*3370# Basically increases the quality of calling sound, but decreases battery length.
34)#3370# Deactivates the above
35)*#0000# Shows your software version
36)*#746025625# This shows if your phone will allow sim clock stoppage
37)*4370# Half Rate Codec activation. It will automatically restart
38)#4370# Half Rate Codec deactivation. It will automatically restart
39)Press and hold # Lets you switch between lines
40)NOKIA 5110/5120/5130/5190 IMEI number: * # 0 6 #
41)Software version: * # 0 0 0 0 #
42)Simlock info: * # 9 2 7 0 2 6 8 9 #

>43)Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
44)Half Rate: * 4 7 2 0 #
45)Provider lock status: #pw+1234567890+1
46)Network lock status #pw+1234567890+2
47)Provider lock status: #pw+1234567890+3
48)SimCard lock status: #pw+1234567890+4
49)NOKIA 6110/6120/6130/6150/6190 IMEI number: * # 0 6 #
50)Software version: * # 0 0 0 0 #
51)Simlock info: * # 9 2 7 0 2 6 8 9 #
52)Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
53)Half Rate: * 4 7 2 0 #
54)Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
55)Simlock info: * # 9 2 7 0 2 6 8 9 # NOKIA 3330 *#06#
56)This will show your warranty details *#92702689#
57)Restore Factory Settings : To do this simply use this code *#7780#
58)Manufacturer Info : Date of Manufacturing *#3283#
59)NOKIA 3110 IMEI number: * # 0 6 #
60)To check the ISDN number on your Nokia use this code *#92772689# .

:: TDMA phones only ::
*3001#12345#
1)This will put your phone into programming mode, and you’ll be presented with the programming menu.
2) Select “NAM1”
3) Select “PSID/RSID”
4) Select “P/RSID 1”
Note: Any of the P/RSIDs will work
5) Select “System Type” and set it to Private
6) Select “PSID/RSID” and set it to 1
7) Select “Connected System ID”
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don’t know yours,
ask your local dealer for it.
8) Select “Alpha Tag”
9) Enter a new tag, then press OK
10) Select “Operator Code (SOC)” and set it to 2050
11) Select “Country Code” and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code

:: Ericsson ::. Ericson T65

*#05# Fake Insert puk screen Press no to exit Ericsson T20
Ericsson T20

MENU tecnichal Info
[type] >*<<**<<***<<**<<** are the right and left menu’s keys Ericsson T18s/T10/A1018s >*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev. <* CLR <** are the right and left menu’s keys
!!!>*<<**<<**:: Siemens :: Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1 .

:: Bosch ::
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 # .

::Alcatel ::.
number:

le=”font-weight:bold;font-size:85%;”>* # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

:: Samsung :: Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842# .

:: Dancall ::
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #

:: Philips ::
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info. .

:: Panasonic ::
Panasonic gd90 gd93
*#9999# SW – Type the code on switch on , during network seek-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with “tone menu ”
Panasonic gd70
*#9999# SW – Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with “tone menu ” .

:: Acer ::
Acer V 750
*#400# Display Adc/ Set Cal-Value –
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code – [ Also reset Security Codes ! ] *#330# (Execute not success) [ unknown ] *#331# (Service deactivated) [ unknown ] *#332# (Service unavailable)[ unknown ] *#333# (Execute not success)[ unknown ] *#351# (Service unavailable) [ unknown ] *#360# (Invalid input)[ unknown ] *#361# (Invalid input) [ unknown ] *#362# (Invalid input) [ unknown ] *#363# (Invalid input) [ unknown ]

:: Genie ::
Genie DB
*#06# IMEI.
*#2254*# Near Cell Mode.For every received BTS will be displayed :Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones’ security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable “Sleep Mode”
*#8463# State of “Sleep Mode”
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW

info.

:: NEC ::
NEC db2000
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:* # 3210 # (send?)
Network barring info : *#8140# (send?)( it could harm your phone )
SIM lock it could harm your phone
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]

Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]

Net Lock 2:
*#2220# (invio) – Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]

Unlock subnetwork
*#1110# (send?) – inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre] ( it could harm your phone ) .

:: Trium ::
Trium Geo/Geo @ – Astral – Cosmo -Aria Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery’s voltage

Trium Galaxy
Push * and type 5806: Production date and SW version .:: Telit ::. Telit GM 810 MONITOR – technical menu – : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ‘ s voltage and temperature .:: Sagem ::. Sagem MC959/940 Select commands’ menu and push *
Displays a new menu’ :
Appli : software vers. and battery’s voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration Sagem MC920 Select commands’ menu and push *
Displays 5 new menus : 1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )

:: Sony ::
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273# .

:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI — Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :”Testmode”
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version .

:: Motorola ::
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK .

Some More Mobile Codes(It may be repeated)
For SAMSUNG:
*#06# Displays imei
*2767*5282# Java reset and (deletes all java midlets)
*2767*63342# Reset media (deletes all sounds and pics)
*2767*927# Wap reset
*#9998*4357# Help menu
*#9998*5282# Java menu
*#9999#0# Monitor mode
*#9999# Software version
*#8888# Hardware version
*#9998*746# Sim info
*#9998*523# Display contrast
*#9998*842# Vibration on (until you push ok)
*#999*289# Buzzer on (until you push ok)
*#9998*288# Battery and field info
*#9998*377# Error log
*#9998*778# Sim service table
*#9998*782# Show date and alaram clock
*#8999*638# Show network information
*#9998*5646# Change operator logo at startup
*#9998*76# Production number
*#9998*968# View melody for alarm
*#9998*585# Non volatile memory
*#3243948# Digital audio interference off
*#32436837# Digital audio interference
*#9999# Show software version
*#0837# Show software version (instruction)
*#0001# Show s*r*al parameters
*#9125# Activates the smiley when charging
*#9998*228# Battery status (capacity, voltage, temperature)
*#9998*246# Program status
*#9998*324# Debug screens
*#9998*364# Watchdog
*#9998*427# Trace watchdog
*#9998*544# Jig detect
*#9998*636# Memory status
*#9998*837# Software version
*#9998*862 Vocoder reg-normal, earphone or carkit can be selected
*#998*872# Diag
*#9998*947# Reset on fatal error
*#9998*999# Last/ check
*#9998*9999# Software version
*2767*2878# Custom EEPROM reset

For LG Mobile:
LG all models test mode: Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*
LG-U81XX SPECIAL CODES
Code to read phone version :

– Phone without SIM
– Enter 277634#*# or 47328545454#
– Select ‘SW Ver.info’
Code to reset phone :
– Phone without SIM
– Enter 277634#*# or 47328545454#
– Select ‘Factory Reset’
Code to enter UNLOCK MENU :
– Phone wit SIM inside
– Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*#

For NOKIA:
Nokia Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) – Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that “All Calls” are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your cell phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines
The Operating Systems

Nokia phones service codes
*#0000# – SW version
*#06# – IMEI
*#war0anty# – SIMLOCK info
*3370# – Enhanced Full Rate ON
#3370# – OFF
*4720# – alternative sound quality codec ON
#4720# – OFF
*#7780# – default factory settings
*#7760# – production serial no.
*#2820# – Bluetooth info.
*#73# – reset phone timers and game scores.
*#7370925538# – delete all the content of the wallet and the wallet code.
*#7370# – soft format — erases all telephone memory.
[Green]*3 – hard format — if only the telephone memory is formatted, puts back the attitudes and reboots
*#delset# – MMS/GPRS settings removal

For Iphone:
*3001#12345#* and tap Call. Enter Field Mode.Field mode reveals many of the inner settings of your iPhone deals, specifically up-to-date network and cell information.
*#06# Displays your IMEI. No need to tap Call.IMEI is the unique identifier for your cell phone hardware. Together with your SIM information it identifies you to the provider network.
*777# and tap Call. Account balance for prepaid iPhone.
*225# and tap Call. Bill Balance. (Postpaid only)
*646# and tap Call. Check minutes. (Postpaid only)These three are pretty self explanatory.
*#21# and tap Call. Setting interrogation for call forwards.Discover the settings for your call forwarding. You’ll see whether you have voice, data, fax, sms, sync, async, packet access, and pad access call forwarding enabled or disabled.
*#30# and tap Call. Calling line presentation check.This displays whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.
*#76# and tap Call. Check whether the connected line presentation is enabled or not.State whether the connected line presentation is enabled or disabled. Presumably similar to the calling line presentation.
*#43# and tap Call. Determine if call waiting is enabled.Displays call waiting status for voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is either enabled or disabled.
*#61# and tap Call. Check the number for unanswered calls.Show the number for voice call forwarding when a call is unanswered. Also show the options for data, fax, sms, sync, async, packet access and pad access.
*#62# and tap Call. Check the number for call forwarding if no service is available.Just like the previous, except for no-service rather than no-answer situations.
*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.And again, but for when the iPhone is busy.
*#33# and tap Call. Check for call control bars.Check all the usual suspects (voice, data, fax, sms, etc) to see whether barring is enabled or disabled for outgoing.

For Sony Ericsson mobile:
1. Sony Ericsson Secret Menu: -> * <- <- * means press joystick, arrow keys or jogdial to the right and <- means left.) You’ll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels. You can also test your phones services and hardware from this menu (main display, camera, LED/illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests) 2. IMEI Number: *#06# -For checking the International Mobile Equipment Identity. 3. Lockstatus: <- * * <- -SIM lock – Do not lock your phone if you don’t k

now the unlock code. This is another good check before you buy any phone, especially second hand ones. If phone is SIM locked, you may not be able to switch to other GSM operators. 4. Shortcut to last dialed numbers: 0# 5. Shortcut to sim numbers: On main menu type a number and press # 6. If you change the language from default to any other language, then it may be difficult to switch to default language. The shortcut is very simple. Just press . stands for right arrow button or joystick.
7.Firmware Version: >*<<**<<* or >*<<*
9.Programming Menu (Short): 987 + >
10.Field Test: 904090 + > (to exit 904090 + > )
11.Phone Test: 904059 + > (to exit 3 +
13.CDMA Mode: 904093 + menu
14.Analog Mode: 904095 + menu DM mode 904959 + menu

I tried to cover much more key codes but still if you have any code plz send me that on sandeep@trickswindow.com and/or comment for this post